1.  

      FU型链式输送机

      FU型链式输送机产品概述

          FU型链式输送机,是引进国外先进技术,并进行了独创性的改进设计后制造出来的一种用于水平(或倾斜≤15°)输送粉状、粒状物料的机械新产品,其使用性能优于螺旋输送机,埋刮板输送机和其它输送设备,广泛用于建材、建筑、化工、矿山、机械、冶炼、粮饲加工等行业,是一种理想的新型输送设备。

      Product overview
         FU chain conveyor, is the introduction of advanced foreign technology, and carry on the improvement of the original design made one for level (or tilt 15 ° or less) of powdery and granular materials mechanical transmission of new products, its performance is better than the screw conveyor, buried scraper conveyor, and other transportation equipment, widely used in building materials, construction, chemical, mining, feeding machinery, metallurgy, food processing and other industries, is an ideal new type of conveying equipment.

      FU链式输送机

      FU型链式输送机工作原理

          FU型链式输送机优越性源于它的工作原理,由于物料具有内摩擦力和侧压力等特性,输送链的运动使机槽内的物料之内部压力和颗粒间的内摩擦力增加,当料层之间的内摩擦力大于物料与槽壁间的外摩擦力时,物料就随着输送链一起象水一样地向前流动,料层高度与机槽宽度的比值满足一定条件时,可形成稳定的物料流。先进的输送原理,精良的设计和制造工艺为本系列产品的优良性能提供了可靠保证。

      Working principles
         
      FU chain conveyor type superiority stems from its work principle, because the material has the character of friction and lateral pressure, the movement of the conveyor chain making machine groove material internal pressure and the interparticle friction force to increase, when the layer between the internal friction is greater than the material between the tank wall and external friction, material together with the conveying chain forward flow like water, layer height and machine the ratio of groove width, while a certain condition can form stable material flow.Advanced transmission principle, sophisticated design and manufacturing technology for the series of products provides a reliable guarantee for the good performance.

      FU链式输送机
      FU链式输送机生产现场
      production site
      FU链式输送机生产现场
      FU链式输送机生产现场
      production site

      FU型链式输送机主要特点

      1.结构合理、设计新颖、技术先进、系列齐全。
      2.全封闭机壳,密封性能好,操作安全,运行可靠。
      3.节省费用,节电且耐用,维修少,降低消耗,提高效益。
      4.输送能力大,允许在较小空间内输送大量物料,输送量达6~600m3/h。
      5.进出口灵活,高架、地面、地坑、水平、爬坡(≤15°)均可安装,输送长度可根据用户设计。
      6.使用寿命长,输送链用合金钢材经先进热处理手段加工而成,正常寿命>5年,链上的滚子寿命≥2~3年。

      Features
      1. Reasonable structure, novel design, advanced technology and complete series.
      2. Totally enclosed chassis, sealed performance is good, safe in operation and reliable running.
      3. Cost saving, power saving and durable, less maintenance, lower consumption, improve business efficiency.
      4. Large conveying capacity, allowing for transporting a large number of materials within a small space throughput up to 6 ~ 600 m3 / h.
      5. Flexible import and export , elevated, ground, pit, level, climbing (15 ° or less) can be installed, length can be designed according to the user.
      6. The service life is long, conveyor chain alloy steel by means of advanced heat treatment and normal life > 5 years, chain roller life of 2 ~ 3 years or more

      FU链式输送机使用现场
      FU链式输送机使用现场
      working site

      FU型链式输送机

      1.设备选用:
      (1)链速 根据物料的状态选择链速,对磨琢性强、温度高、粗大颗粒比例多及料粒大的物料选用慢速对水泥和生料的最适链速可参照表2-2选择,其它与水泥性能及状态相近的物料可以参照选择。
      (2)机型 根据输送量选定机型。在同样输送量下,选择较大机型可使链速降低,延长使用寿命,但输送量低于应输送量30%以上时,会发生料层过薄,形成空转,增加磨损。
      (3)动力 根据输送量,输送长度和工艺状况参照表3-7选择动力。驱动装置的装配形式分为X1、X2及左右装等,X2为背装式。
      (4)进出料口 各进出料口,用户根据需要进行选择。
      a.以免进料畅,对流动性差,湿度大的物料不宜采用上进料口。
      b.第一只进料口离尾轴较近时,不宜采用上进料口。
      c.根据用户需要,本机可设多只进、出料口,还可提供带闸出料口。

      Equipment selection
      (1) the chain speed according to material status to choose chain speed, the grinding cut resistant, high temperature, thick particle proportion and material size bigger choose slow of cement and raw material of the chain of optimum speed can reference table 2-2 choice, and the cement performance and other similar material can refer to choose.
      (2) models according to the throughput selected models.Under the same throughput, choose bigger models can make chain speed reduce, prolong service life, and throughput is lower than the throughput should be more than 30%, material layer will happen too thin, idling, increase the wear and tear.
      (3) the power According to the throughput, conveying the length and the process conditions reference table 3-7 choice.Drive assembly form around the X1, X2, and etc, X2 for back pack type.
      (4) in and out of the mouth All the in and out of the mouth, the user to choose according to need.
      A. in order to avoid feeding chang, the liquidity is poor, high humidity of material feeding port on the unfavorable use.
      B. the first inlet close, from the shaft inlet on the unfavorable use.
      C. according to user needs, the machine can set more than into and out of the material, also can provide with brake discharging port.

      FU型链式输送机技术参数表

      Parameters
      型号 槽宽
      mm
      理想粒度
      mm
      最大粒度
      mm
      输送量m3/h
      链速m/min
      11 13.5 17 21 22.7 28
      FU150 150 <4 <8 10   16   20  
      FU200 200 <5 <10 20   30   40  
      FU270 270 <7 <15 35 45 55   70 80
      FU350 350 <9 <18   70 85     130
      FU410 410 <11 <21   90 110     175
      FU500 500 <13 <25     170   210 270
      FU600 600 <15 <30   184 224   276 340
      FU700 700 <17 <35   250 305   376 460

      更多输送机械设备产品
      • 官方微信