SCG型长距离高温物料振动输送机广泛应用于矿山、冶金、建材、煤炭、化工、粮食、医药等行业且温度在300℃ 以下的各种粉状、粒状、块状及其混合物等物料的输送。它是一种通用性很强且结构先进的高温物料振动输送设备。例如:水泥行业的原料、中间半成品及成品的输送,化工行业固体原料、半成品的输送,采掘行业矿石、精矿与尾矿的输送等等。它是一种通用性很强且结构先进的振动输送设备。
Product overview
SCG type long and high temperature material vibrating conveyor is widely used in mining, metallurgy, building materials, coal, chemical industry, food, medicine, etc, and the temperature was below 300 ℃ of all kinds of powder, granular, block and its mixture material conveying.It is a kind of strong commonality and advanced structure of high temperature material conveying equipment vibration.For example, the cement industry of raw materials, semi-finished products and finished products among transportation, chemical industry raw materials, semi-finished products delivery, solid ore mining industry, concentrate and tailings transportation and so on.It is a kind of strong commonality and advanced structure vibration conveyor equipment.

Production site



Working principles
SCG long vibration conveyor series adopts two vibration motor as vibration source, using the principle of self synchronous, two vibration motor reverse rotation, reciprocating vibration of the balance of the bottom of the conveyor frame after the reed and the role of the guide plate spring, drives the upper conveying groove vibration, so as to achieve the purpose of conveying material.SCG type long and vibrating conveyor with open and closed two, chute cross section can make a circle, rectangle and trapezoid etc. Various type.Chute feed and discharge can be made into a feed according to need, selects a material, feed, more points expected, multipoint feeding and selects a material type.Longer transmission distance available connect more than one conveyor conveyor.SCG type long vibration conveyor rubber spring manger or steel spring bearing, relying on fixed on the feeding trough since the synchronous running of the two vibrating motors, the chute produce linear vibration.


Animation shown



 1.Can be totally enclosed conveying, eliminate the dust pollution, also can open delivery;
2. high capacity, good insulation effect, without cooling device, less consumption;
3. Simple structure, easy to debug, the vulnerability of small variety, convenient maintenance;
4. Start and stop quickly, smooth operation, good performance of vibration isolation, noise small,;
5. Easy installation, without special foundation and stude screws, easy to move;
6. Single conveyor distance of 20 meters, multimachine soft connection can follow need any longer;
7. Can be more inlet and discharge, suitable for cement clinker and slag bottom, top conveying library.



     SCG type long and high temperature material vibrating conveyor is widely used in building material, metallurgy, chemical industry, coal mining, machinery manufacturing, coal, tobacco, food, pharmaceutical and other industries.Its mainly used in powder, granular, block and its hybrids such as the material of conveyor.For example, the cement industry of raw materials, semi-finished products and finished products among transportation, chemical industry conveying of solid raw materials, semi-finished products, mining industry ore, concentrate and tailings transportation etc.


型号 SCG300 SCG400 SCG600 SCG800
单机输送距离(m) 5-25 8-25
输送产量(T/H) ≤15 ≤25 ≤40 ≤60
电动功率(TW) 3-7.5 5.5-15
设备每米重量(KG/M) 300 500 700 800
物料性质 粒度(MM) 0.5<D<100 0.5<D<200
物料性质 温度(℃) <300
物料性质 含水量及粘性 含水量小于5%的非粘性、非易燃易爆物料
       2.若输送其它物料时,可参照下列公司换算产量 Q=a*Q’Qλ/1.6 a-折减系数约为0.5∽1。粉状物料取小值,块装物料取大值。 Q’-表中所示产量λ-输送物料的比重。

Note: 1. The transport production is medium weight is 1.6 t/m 3, determination of cement clinker temperature less than 300 ℃.
2. If transporting other materials can refer to the following company conversion output Q = a * Q Q 'lambda / 1.6 a - reduction factor of about 0.5 ∽ 1.Powder material of little value and of great value in block material.Q '- shown in the table lambda - the proportion of conveying material production.
  • 官方微信