1.  

      座式电磁振动给料机

      座式电磁振动给料机

      座式电磁振动给料机概述

      Product overview
          座式电磁振动给料机(喂料机)广泛应用于冶金、矿山、煤炭、建材、化工、电力、粮食、机械等行业,可将颗粒状、粉状物料均匀、连续、定量地送至受料装置。特别适用于自动配料、定量包装、生产流程自动化、给料精度要求高的场合。给料机(喂料机)结构简单,调试方便。安装方式可分为座式安装和悬挂式安装。正常给料时可下倾10°安装,对粘性或含水量较高的物料或细粉料可下倾15°安装使用。给料机(喂料机)选型设计时应考虑设置溜咀及闸门,具体配置可参照GZV系列及GZ系列电磁振动给料机(喂料机)的配置方案,以保证振幅和给料量的稳定。
         A type of electromagnetic vibrating feeder is widely used in metallurgy, mining, coal, building materials, chemical industry, electric power, food, machinery and so on, granular, powdery materials can be uniform, continuous, sent to quantitatively by the device.Especially suitable for automatic batching, quantitative packaging, production process automation, feeding requiring high precision.Feeder simple structure and convenient debug.Installation can be divided into a type installation and hanging installation.Normal feeding can install downdip 10 °, the viscous or high water content material or powder material downdip 15 ° install and use.Feeder type selection design should be considered when setting sliding nozzle and the gate, you may refer to the specific configuration GZV series and GZ series electromagnetic vibrating feeder  configuration scheme, to ensure the stability of amplitude and quantificationally.
      电磁振动给料机 座式电磁振动给料机

      GZ系列电磁振动给料机工作原理

        电磁振动给料机的激振器电磁线圈的电流是经过单相半波整流的,当线圈接通后在正半周内有电流通过,衔铁与铁芯之间便产生了一脉冲电磁力互相吸引,这时槽体向后运动,激振器的主弹簧发生变形储存了一定的势能,在负半周线圈中无电流通过,电磁力消失,主弹簧释放能量,使衔铁和铁芯朝反方向离槽体向前运动,于是电磁振动给料机以交流电源的频率作每分钟3000次的往复振动,由于槽体的底平面与激振力作用线有一定的夹角,因此槽体中的物料沿抛物线的轨迹连续不断地向前运动。调节整流电压的高低,即可控制电磁振动给料机的送料量。给料机采用可控硅整流供电。改变可控硅的导通角,即可控制输出电压的高低。根据使用条件,可取不同信号来控制可控硅导通角的大小以达到自动定量送料的目的。

      Working principles
            
      Electromagnetic vibrating feeder of the vibrator of electromagnetic coil current is a single-phase half-wave rectifier, when the coil after connect in the positive half cycle with an electric current passes through, between armature and core to produce a pulse electromagnetic force to attract each other, when the tub backwards movement, the main spring vibrator distortion stored potential energy, no current through in the negative half cycle coil, electromagnetic force, the main spring release energy, make the armature and core in the opposite direction from the tub forward movement, so the electromagnetic vibrating feeder with the frequency of the ac power source 3000 beats per minute of reciprocating vibration, due to the tub bottom plane and the excitation force corresponding to a certain Angle, so material along a parabolic trajectory in tub continuously move forward.Adjust the height of the rectifier voltage, can control of electromagnetic vibrating feeder to send shoes.Feeder with silicon controlled rectifier power supply.Change the conduction Angle of silicon controlled rectifier to control the output voltage of the high and low.According to the conditions of use, recommend different signal to control the size of the thyristor conduction Angle in order to achieve the purpose of automatic quantitative feeding.
      不锈钢座式电磁振动给料机 不锈钢座式电磁振动给料机

      电磁振动给料机配套控制箱

      Form a complete set of control box
          配套控制箱具有手动控制和自动控制两种功能。自动控制信号为0~5V或~20mA。控制箱基本电路采用先进的移相触发器控制固态继电器作为主回路整流控制原件,可靠性好、寿命长,是一种新型控制电路。控制箱分为挂式与台式两种,订货时请注明。
          Form a complete set of control box with manual control and automatic control two functions.Automatic control signal is 0 ~ 5 v or ~ 20 ma.Basic circuits of control box is the advanced phase shift trigger control of solid state relay as the main circuit of the original rectifier control, good reliability, long service life, is a new type of control circuit.Control box is divided into hanging and table two, please specify when ordering.

      座式电磁振动给料机技术参数表

      Parameters
      类型 型号 生产率(t/h) 给料粒度mm 双振幅mm 供电电压(V) 电流(A) 有效功率(Kw) 配套控制箱信号
      水平 -10度 工作电流 表示电流
      基本型 GZ1 5 7 50 1.75 220 1.34 1 0.06 XKZ-5G2
      GZ2 10 14 50 3.0 2.3 0.15
      GZ3 25 35 75 4.58 3.8 0.2
      GZ4 50 70 100 8.4 7 0.45 XKZ-20G2
      GZ5 100 140 150 12.7 10.6 0.65
      GZ6 150 210 200 1.5 380 16.4 13.3 1.2 XKZ-20G3
      GZ7 250 350 250 24.6 20 3
      GZ8 400 560 300 39.4 32 4
      GZ9 600 840 350 47.6 38.6 5.5 XKZ-200G3
      GZ10 750 1050 500 39.4*2 32*2 4*2 XKZS-200G3
      GZ11 1000 1400 500 47.6*2 38.6*2 5.5*2
      上振型 GZ3S 25 35 75 1.75 220 4.58 3.8 0.2 XKZ-5G2
      GZ4S 50 70 100 8.4 7 0.45 XKZ-20G2
      GZ5S 100 140 150 12.7 10.6 0.65
      GZ6S 150 210 200 1.5 380 16.4 13.3 1.5 XKZ-20G3
      GZ7S 250 350 250 24.6 20 3 XKZ-100G3
      GZ8S 400 560 300 39.4 32 4
      封闭型 GZ1F 4 5.6 40 1.75 220 1.34 1 0.06 XKZ-5G2
      GZ2F 8 11.2 40 3.0 2.3 0.15
      GZ3F 20 28 60 4.58 3.8 0.2
      GZ4F 40 56 60 8.4 7 0.45 XKZ-20G2
      GZ5F 80 112 80 12.7 10.6 0.65
      GZ6F 120 168 80 1.5 380 16.4 13.3 1.5 XKZ-20G3
      轻槽型 GZ5Q 100 140 200 1.5 220 12.7 10.6 0.65 XKZ-20G2
      GZ6Q 150 210 250 380 16.4 13.3 1.5 XKZ-20G3
      GZ7Q 250 350 300 24.6 20 3 XKZ-100G3
      GZ8Q 400 560 350 39.4 32 4
      平槽型 GZ5P 50 70 100 1.5 220 12.7 10.6 0.65 XKZ-20G2
      GZ6P 75 105 380 16.4 13.3 1.5 XKZ-20G3
      GZ7P 158 175 24.6 20 3 XKZ-100G3
      宽槽型 GZ5K1   200 100 1.5 220 12.7*2 10.6*2 0.65*2 XKZ-20G2
      GZ5K2   240
      GZ5K3   270
      GZ5K4   300
      圆管型 GZ1G 2   50 1.75 220 1.34 1 0.06 XKZ-5G2
      GZ2G 4   50 3.0 2.3 0.15 XKZ-5G2
      GZ3G 10   60 4.58 3.8 0.2 XKZ-5G2
      GZ4G 20   70 8.4 7 0.45 XKZ-20G2
      GZ5G 40   80 12.7 10.6 0.65 XKZ-20G2
      特大型 GZ11-T   1000物料为煤比重0.85 300 1.5 380 47.6*2 38.6*2 5.5*2 SZK.00

      上一篇:皮带给料机 下一篇:星型卸料器
      更多给料机械设备产品
      • 官方微信